Poly(vinylidene) fluoride membranes coated by heparin/collagen layer-by-layer, smart biomimetic approaches for mesenchymal stem cell culture.

The use of piezoelectric materials in tissue engineering has grown considerably since inherent bone piezoelectricity was discovered. Combinations of piezoelectric polymers with magnetostrictive nanoparticles (MNP) can be used to magnetoelectrically stimulate cells by applying an external magnetic field which deforms the magnetostrictive nanoparticles in the polymer matrix, deforming the polymer itself, which varies the surface charge due to the piezoelectric effect. Poly(vinylidene) fluoride (PVDF) is the piezoelectric polymer with the largest piezoelectric coefficients, being a perfect candidate for osteogenic differentiation. As a first approach, in this paper, we propose PVDF membranes containing magnetostrictive nanoparticles and a biomimetic heparin/collagen layer-by-layer (LbL) coating for mesenchymal stem cell culture. PVDF membranes 20% (w/v) with and without cobalt ferrite oxide (PVDF-CFO) 10% (w/w) were produced by non-solvent induced phase separation (NIPS). These membranes were found to be asymmetric, with a smooth surface, crystallinity ranging from 65% to 61%, and an electroactive ß-phase content of 51.8% and 55.6% for PVDF and PVDF-CFO, respectively. Amine groups were grafted onto the membrane surface by an alkali treatment, confirmed by ninhydrin test and X-ray photoelectron spectroscopy (XPS), providing positive charges for the assembly of heparin/collagen layers by the LbL technique. Five layers of each polyelectrolyte were deposited, ending with collagen. Human mesenchymal stem cells (hMSC) were used to test cell response in a short-term culture (1, 3 and 7 days). Nucleus cell counting showed that LbL favored cell proliferation in PVDF-CFO over non-coated membranes.

Highly Sensitive Piezoresistive Graphene-Based Stretchable Composites for Sensing Applications.

Nanocarbonaceous materials with specific geometries and physicochemical properties allow the development of high-performance polymer-based smart composite materials. Among them, chemical treatments of graphene allow tailoring its electrical conductivity and, therefore, tuning functional response of materials for sensing applications. Polymer-based nanocomposites have been developed from styrene-ethylene-butylene-styrene (SEBS), a high deformation thermoplastic elastomer, and different graphene-based fillers, including graphene oxide (GO), reduced graphene oxide (rGO), and graphene nanoplatelets (G-NPLs). It is shown that the electrical conductivity shows a percolation threshold around 2 wt % for GO and rGO, remaining nearly independent of the filler content for G-NPL filler contents up to 6 wt %. Furthermore, GO/SEBS and rGO/SEBS composites show high piezoresistive sensibility with gauge factors ranging from 15 up to 120 for strains up to 10%. Thus, GO/SEBS and rGO/SEBS composites can represent a new generation of materials for strain sensor applications, as demonstrated in their implementation in a hand glove prototype with finger movement monitoring.

Effect of cobalt loading on the solid state properties and ethyl acetate oxidation performance of cobalt-cerium mixed oxides.

Cobalt-cerium mixed oxides were prepared by the wet impregnation method and evaluated for volatile organic compounds (VOCs) abatement, using ethyl acetate (EtAc) as model molecule. The impact of Co content on the physicochemical characteristics of catalysts and EtAc conversion was investigated. The materials were characterized by various techniques, including N2 adsorption at -196°C, scanning electron microscopy (SEM), X-ray diffraction (XRD), H2-temperature programmed reduction (H2-TPR) and X-ray photoelectron spectroscopy (XPS) to reveal the structure-activity relationship. The obtained results showed the superiority of mixed oxides compared to bare CeO2 and Co3O4, demonstrating a synergistic effect. The optimum oxidation performance was achieved with the sample containing 20wt.% Co (Co/Ce atomic ratio of ca. 0.75), in which complete conversion of EtAc was attained at 260°C. In contrast, temperatures above 300°C were required to achieve 100% conversion over the single oxides. Notably, a strong relationship between both the: (i) relative population, and (ii) facile reduction of lattice oxygen with the ethyl acetate oxidation activity was found, highlighting the key role of loosely bound oxygen species on VOCs oxidation. A synergistic Co-Ce interaction can be accounted for the enhanced reducibility of mixed oxides, linked with the increased mobility of lattice oxygen.

Highly efficient and reusable CNT supported iron(ii) catalyst for microwave assisted alcohol oxidation.

The highly efficient eco-friendly synthesis of ketones (yields over 99%) from secondary alcohols is achieved by combination of [FeCl2{η(3)-HC(pz)3}] (pz = pyrazol-1-yl) supported on functionalized multi-walled carbon nanotubes and microwave irradiation, in a solvent-free medium. The carbon homoscorpionate iron(ii) complex is the first one of this class to be used as catalyst for the oxidation of alcohols.

Adsorption of ciprofloxacin on surface-modified carbon materials.

The adsorption capacity of ciprofloxacin (CPX) was determined on three types of carbon-based materials: activated carbon (commercial sample), carbon nanotubes (commercial multi-walled carbon nanotubes) and carbon xerogel (prepared by the resorcinol/formaldehyde approach at pH 6.0). These materials were used as received/prepared and functionalised through oxidation with nitric acid. The oxidised materials were then heat treated under inert atmosphere (N2) at different temperatures (between 350 and 900°C). The obtained samples were characterised by adsorption of N2 at -196 °C, determination of the point of zero charge and by temperature programmed desorption. High adsorption capacities ranging from approximately 60 to 300 mgCPxgC(-1) were obtained (for oxidised carbon xerogel, and oxidised thermally treated activated carbon Norit ROX 8.0, respectively). In general, it was found that the nitric acid treatment of samples has a detrimental effect in adsorption capacity, whereas thermal treatments, especially at 900 °C after oxidation, enhance adsorption performance. This is due to the positive effect of the surface basicity. The kinetic curves obtained were fitted using 1st or 2nd order models, and the Langmuir and Freundlich models were used to describe the equilibrium isotherms obtained. The 2nd order and the Langmuir models, respectively, were shown to present the best fittings.